Paradigm PDR subwoofer repair

TL;DR, if your paradigm PDR-10 isn’t powering on automatically, check the fuse. It can be easily accessed by removing the back panel of the subwoofer.

Sunday morning and I had the house to myself for a few hours so decided to listen to my favorite recording of Beethoven’s 5th Symphony. Firing up the 3rd and 4th movements really loud always serves to restore my faith in humanity. 

paradigm pdr 10

Anyway, a few bars into the 3rd movement and I knew something was up with my hifi. My Vandersteen’s sounded a bit thin and I noticed that my subwoofer power light wasn’t on. The paradigm pdr-10 that I have is not a great subwoofer but the vandersteens towers that I have are such that they only need a tiny bit of reinforcement in the very bottom end so it works for me. It is supposed to power on automatically once it detects a signal from the receiver but for some reason it wasn’t powering on and I couldn’t get the light on the front to come on. 

I hit pause on the symphony and brought the subwoofer over to my kitchen table where a few screws later I determined that a blown fuse was likely my problem. Unfortunately this was not an easy fuse to source. It is a 1 1/2 amp time delay fuse. My local hardware store, which has EVERYTHING didn’t have it but they did test the fuse I brought in and confirmed it was blown so I knew I was on the right track.

IMG 0384

 

Ultimately I purchased the replacement part from Amazon and finally got around to hearing the 4th movement in all of its bottom-heavy beauty. 

This is the fuse you want to order:

IMG 0385

Posted

in

,